Top cover
Description
Top cover (includes TouchPad and cable)
Before removing the top cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
NOTE:
When replacing the top cover, be sure to remove the following components from the defective
top cover and install them on the replacement top cover:
●
Front speakers (see
●
Power button board and cable (see
●
Fingerprint reader board (see
●
TouchPad button board (see
Remove the top cover:
1.
Remove the twelve Phillips PM2.5×8.5 screws that secure the top cover to the computer.
Battery on page
45), and then remove the following components:
Hard drive on page
46)
Optical drive on page
Keyboard on page
57)
Front speakers on page
Power button board on page
Fingerprint reader board on page
TouchPad button board on page
51)
64)
65)
66)
67)
Component replacement procedures
Spare part number
682101-001
61