Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup - HP Mini 5103 User Manual

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:
●
To set a new boot order that the computer uses each time it is turned on, by changing the boot
order in Computer Setup.
●
To dynamically choose the boot device, by pressing
Menu" message is displayed at the bottom of the screen, and then pressing
Device Options menu.
●
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select System Configuration > Boot Options. Confirm
that Enabled is selected next to MultiBoot.
NOTE:
4. Use a pointing device or the arrow keys to select a device in the list.
5. To move the device up in the boot order, use a pointing device to click the plus sign (+), or press
the + key.
– or –
To move the device down in the boot order, use a pointing device to click the minus sign (-), or
press the
6. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
to enter BIOS Setup.
MultiBoot is enabled at the factory.
- key.
esc while the "Press the ESC key for Startup
esc while the "Press the ESC key for Startup Menu"
Choosing MultiBoot preferences 105
f9 to enter the Boot