Table of Contents
Advertisement
Hard drive
NOTE:
The hard drive cable is included in the Misc Cable Kit, spare part number 608009-001.
Description
640-GB, 5400 rpm, (requires hard drive hardware kit 608015-001)
500-GB, 7200 rpm, (includes hard drive mounting bracket)
320-GB, 7200 rpm, (includes hard drive mounting bracket)
250-GB, 7200 rpm, (includes hard drive mounting bracket)
160-GB, 7200 rpm, (includes hard drive mounting bracket)
Hard drive hardware kit (includes screws and hard drive bracket)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory/wireless module compartment cover (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Remove the Phillips PM2.5×5.0 screw (1) that secures the hard drive cover to the computer.
Battery on page
41).
Spare part number
631160-001
634919-001
608013-001
608012-001
608011-001
608015-001
Memory module on page
Component replacement procedures
42)
51
Advertisement
Table of Contents
