Table of Contents
Advertisement
12.
Lift up the bottom of the panel (3), and them remove the panel from the enclosure (4). The display
panel is available using the spare part number 608019-001.
13.
If it is necessary to replace the display cable, follow these steps:
a.
Turn the display panel upside down in front of you.
b.
Disengage the webcam cable from the glue securing it to the back of the display (1).
c.
Peel back the tape that secures the display cable to the display (2).
d.
Disconnect the display cable from the display (3).
e.
Remove the display cable from the display (4).
76
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
