Printing From A Bluetooth-Enabled Device - Dell 926 All In One Inkjet Printer User Manual

Printing From a Bluetooth-enabled Device

Setting up a Connection Between Your Printer and a
Bluetooth-enabled Device
You need to set up a connection between a Bluetooth-enabled device and your printer if you are sending a
print job from the Bluetooth device for the first time. You will need to repeat the setup if:
You reset the printer to its factory default settings. For more information, see
Settings.
You changed the Bluetooth security level or the Bluetooth passcode. For more information, see
the Bluetooth Security
The Bluetooth-enabled device you are using requires users to set up a Bluetooth connection on every
print job. Refer to the instructions included with the device for Bluetooth printing information.
You cleared the contents of the Bluetooth device list. For more information, see
The name of the Bluetooth device you are using is automatically deleted from the Bluetooth device list.
When the Bluetooth security level is set to High, the printer saves a list of up to 8 Bluetooth devices
that have previously set up a connection with the printer. If there are already 8 devices on the list, and
then you need to set up a connection for another Bluetooth device, the first device is automatically
deleted from list so that the new device can be stored. You need to repeat the setup of the deleted
device to be able to send a print job to the printer.
NOTE: You need to set up a connection for each Bluetooth device that you will use to send a print job
to the printer.
To set up a connection between the printer and a Bluetooth-enabled device:
1. Turn on the printer.
2. Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
Level.
Restoring Factory Default
Setting
Bluetooth Mode.