Chapter 4: System Configuration - SMC Networks SMCDPCR-AP User Manual

Chapter 4: System Configuration

The access point's basic settings can be configured using the Setup Wizard, as
described in the previous chapter, "Initial Configuration." However, for some
installations, you may need to configure specific settings that are not available in the
Setup Wizard. The Advanced Setup menu provides access to all the unit's settings
for complete control of the access point's features.
To access the Advanced Setup menus, follow these steps:
1. Use your web browser to connect to the management interface using the
default IP address of 192.168.1.1 or the IP address set through the Wizard.
2. Log into the access point management interface by entering the user name
"admin" and password "smcadmin" (the default), and click "LOGIN."
3. When the home page displays, click on Advanced Setup. The following page
displays.
The information in this chapter is organized to reflect the structure of the web
management screens for easy reference. However, it is recommended that you first
change the user name and password to control access to the management
interface. For details, see "Administration" on page 4-7.
Figure 4-1. Advanced Setup
4-1