Fast Forward / Reverse Search; Slow Forward / Reverse; Zoom; Track Search - Sharp DV-NC100S Operation Manual

PLAYING A DISC

Fast Forward / Reverse Search

DVD CD
1 During playback, press FWDg or REVh repeatedly
to select the required forward or reverse speed.
• For DVDs, fast forward or reverse search speed is dif-
ferent depending on the disc. Approximate speed is 1
(x2), 2(x8), 3 (x50), and 4 (x100).
• For Video CDs, fast forward or reverse search speed is
different depending on the disc. Approximate speed is
1(x2), 2(x8), 3(x30).
• For audio CDs, the approximate speed is x16.
• For MP3, the approximate speed is x8.
• If you are using FFg or REWh on the front panel,
press and hold it for more than 1.5 seconds. When you
reach the desired speed, release the button.
2
To return to normal playback, press PLAY.

Slow Forward / Reverse

1
During playback, press STILL/PAUSE.
2
Press FWDg or REVh.
• Slow motion playback will begin and sound will be
muted.
3 Press FWDg or REVh repeatedly to select the
required speed.
• Slow forward or reverse speed is different depending
on the disc. Approximate speed is 1 (1/16), 2 (1/8), and
3 (1/2).
• If you are using FF g or REW h on the front
panel, press and hold it for more than 1.5 seconds.
When you reach the desired speed, release the button.
4
To return to normal playback, press PLAY.
NOTES:
• Set STILL MODE to FIELD on the Display menu if pic-
tures in the slow playback mode are blurred. (Refer to
page 28.)
• You cannot play Video CDs in reverse slow motion.

Zoom

DVD
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
1
Press ZOOM during playback.
• Playback will continue.
2
Press ZOOM repeatedly to select the required zoom fac-
tor: x2, x4 or OFF.
3 Use Arrow ( K /L / s / B ) to move the zoomed picture
across the screen.
4
To exit zoom mode, press ZOOM to OFF.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
• Only x2 zoom is available on Video CDs and JPEG.
• You may not be able to move zoomed JPEG pictures.
MP3 DVD-RW
VR mode
DVD DVD-RW
VR mode
DVD-RW VCD JPEG
VR mode

Track Search

VCD
There are three ways to begin playback on an Audio CD,
Video CD, MP3 or JPEG disc at a specific Track.
Using the Numerical buttons
1 Press the numerical buttons to enter the desired Track
number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical but-
tons.
Using the DIRECT SKIP.
1
Press DIRECT SKIP.
• The track search display appears.
2
Within 30 seconds, select a desired track number using
the numerical buttons. For single digits press "0" first.
• Playback will start at the selected track.
VCD
Using the SKIP H G
During playback, press SKIP G to move to the next track.
Press it quickly and repeatedly to skip subsequent tracks.
Press SKIP H to go back to the beginning of the current
track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the VCR/DVD dis-
play panel.
• If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the next
track.
NOTE:
• SKIP H G are not available when playback is
stopped.

Title / Chapter Search

1
During playback, press DIRECT
SKIP repeatedly until the
Chapter Search or the Title
Search screen appears.
2 Enter the desired chapter/title number using the numeri-
cal buttons.
NOTE:
• Depending on the disc being played, this function can
also be performed by directly entering the desired
chapter number using numerical buttons. Refer to the
manual accompanying the disc.
– 22 –
CD MP3 VCD
without PBC function
DVD
/2
JPEG
DVD-RW
VR mode
EN