Table of Contents
Advertisement
Useful adjustment settings
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Auto Sync.", and then
press ENTER.
4
Press c/d to select "Yes", and then press
ENTER.
• Auto Sync. starts and "Adjusting the image"
displays.
MENU
[ Setup ... Auto Sync. ]
Yes
5
Press MENU to exit.
NOTE
• When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
• Auto Sync. can be executed only when inputting analogue
signals.
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
1
2
3
4
No
Selected item
30%
H-Pos.
V-Pos.
Clock
Phase
5
6
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
• "Clock" and "Phase" in the "Fine Sync." menu can be
adjusted only when inputting analogue signals.
Press MENU and the MENU screen displays.
Press c/d to select "Setup".
Press a/b to select "Fine Sync.", and then
press ENTER.
Press a/b to select the specific
adjustment item.
H-Pos.
[ 90]
–
V-Pos.
[ 39]
–
Clock
[ 90]
–
Phase
[ 20]
–
Reset
Description
Centres the image by moving it to the left
or right.
Centres the image by moving it up or
down.
Adjusts when the image flickers with
vertical stripes.
Adjusts when characters have low contrast
or when the image flickers.
Press c/d to adjust the item to your
desired position.
Press MENU to exit.
+
+
+
+
35
Advertisement
Chapters
Table of Contents
