Fine Sync. Adjustment (Pc Input Mode Only); Input Select - Sharp LC-65G5X Operation Manual

Useful adjustment settings
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Fine Sync.", and then
press ENTER.
4
Press a/b to select the specific
adjustment item.
H-Pos. [90]
V-Pos. [39]
Clock [90]
Phase [20]
Reset
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", press ENTER, press c/d
to select "Yes", and then press ENTER.
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it to the up or
V-Pos.
down.
Adjusts when the image flickers with
Clock
vertical stripes.
Adjusts when characters have low contrast
Phase
or when the image flickers.
– +
– +
– +
– +
Description

Input Select

Selecting input source
Can use for selecting the input source.
1
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the Display.
2
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the Display to select the
input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b/c/d to select a signal type you
want to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no colour image displays.
Input type
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• Use 21 Pin Euro SCART cable if you wish to input RGB
signal.
RGB signal is displayed in INPUT 1 and INPUT 3 but is
*
not applicable when using RCA/21 Pin-Euro SCART
conversion connector.
Selectable item
CVBS, RGB*
Y/C, CVBS
COMPONENT, Y/C, CVBS, RGB*
AUTO, S-Video, Video
PC digital, PC analogue,
AV digital, AV analogue
49