Playing Dolby Digital (5.1 Channel), Dts Or Mpeg Audio - Sharp DV-NC85 Operation Manual

Playing Dolby Digital (5.1 channel), DTS or MPEG audio

Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/
DTS/MPEG Audio surround processor to your Product's coaxial digital jack or optical digital jack provides richer
and more powerful audio play.
I Connection to a processor or amplifier with a coaxial digital input jack or optical digital jack
You can make this connection
using a coaxial digital cable or
optical digital cable.
This Product
Digital Connection to an MD to Record a CD
Some Audio CDs and VIDEO CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Product directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
I Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD or VIDEO CD
Play the disc as you normally would, with the audio mode set to "L+R" (see page 91). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
I Important notes to play DTS/Dolby Digital sounds on DVD discs
• Do not play DTS sounds of the disc when the audio equipment connected to the optical digital output jack is
not equipped with a DTS decoder. Do not play Dolby Digital sounds of the disc when the audio equipment
connected to the optical digital output jack is not equipped with Dolby Digital decoder. This can result in the
production of abnormal sounds that can damage the speaker or have a detrimental effect on your ears.
• When you play DTS sounds, the sound does not come out from the DVD AUDIO output jacks.
• When you enjoy the DTS digital surround sounds, select the DTS sounds on the Title menu or set "
in Function Control Screen to "DTS". Set the audio mode to "L+R" for CDs.
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial
digital input jack or an optical digital input jack.
• When playing a DVD Video disc recorded with linear PCM audio at a sampling frequency of 96 kHz, the audio of the
digital output has a sampling frequency of 48kHz.
DVNC85(E)#014_022.p65
OPTICAL COMPONENT
Y
P
B
( C )
B
P
R
( C )
R
To OPTICAL digital
out jack
------------------
Optical digital cable
(commercially available)
To optical digital
input jack
Audio equipment
17
Required cable
Coaxial digital cable (commercially available)
Optical digital cable (commercially available)
DVD OUT
VCR/DVD LINE
OUT IN 1
S-VIDEO DIGITAL
AUDIO
R
AUDIO
L
R
AUDIO
VIDEO
L
To coaxial
DIGITAL OUT jack
or
--------------------
Coaxial digital cable
(commercially available)
To coaxial
digital input jack
DIGITAL IN
OPTICAL COAXIAL
03.6.24, 9:49 AM
DVD Audio Connections
ANTENNA
IN
OUT
Audio setting"
17
GB