Simple Recording Timer; Changing The Contents Of The Simple Recording Timer; Cancelling The Simple Recording Timer - Sharp VC-A410U Operation Manual

Simple Recording Timer

SIMPLE RECORDING TIMER
The Simple Recording Timer (SRT) enables you to set the recording stop time. The SRT can be set on the TV
screen by using the remote control.
The SRT cannot be set if the clock has not been set. Make sure the clock is set before setting the SRT.
• Turn on the TV and select the video channel. (See Setting the 3
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (POWER
LED indicator will light up).
• Press TV/VCR to select "VCR" (VCR LED indicator will light up).
Only for Hi-Fi models
• If necessary, set "SAP" on the SET UP–selection screen. (See Mode Selection.)
Example: Recording a TV program in the SP mode. The program is on Channel 2, ending at 9:50 AM. The
present time is 8:43 AM.
S P
Recording Speed
S P S T O P
S P S T O P
% When the stop time comes, recording is finished and the power turns off.

Changing the Contents of the Simple Recording Timer

! Press REC. The stop time flashes on the TV screen.
@ Change the stop time as desired using REC.

Cancelling the Simple Recording Timer

! Press STOP.
• The Simple Recording Timer has priority over other
recordings.
• Ordinary timer programs will not be recorded when portions of
the time setting of the simple recording timer and of the time
setting of the ordinary timer recording overlap.
28
! Select the desired channel with the numbered buttons or
0 2
@ Set the recording speed (SP or EP) with TAPE SPEED on
# Press REC to enter the recording mode (REC LED
0 2
8 : 5 0 A M
$ Each press of REC increases the stop time by 10
0 2
9 : 5 0 A M
4 Output Channel Selector.)
CH ∂/ƒ.
Ex.: Channel 02
the remote control.
Ex.: SP
indicator will light up).
Then, press REC again to enter the simple recording
timer mode (TIMER LED indicator will light up). The
recording stop time is displayed.
Ex.: 8:50 AM
minutes.
Ex.: 9:50 AM
• The recording stop time will flash for a few seconds before the
stop time is fixed.
Example:
Ordinary timer recording
(9:30 AM to 10:30 AM)
Simple Recording Timer
(9:00 AM to 10:00 AM)
NOT Record-
recorded ed
9:00 10:00 11:00
Recorded
12:00