Tamper Proof - Sharp VC-A410U Operation Manual

Tamper Proof

With this feature, you can lock all VCR modes to prevent accidental change.
This function works even when the VCR power is off, thus preventing children from operating
the VCR or viewing select programs while you are away from home.
Tamper Proof
! Press TAMPER PROOF on the remote control for about 2 seconds.
The TAMPER PROOF LED indicator will flashing for about 2 seconds and remain lit. Tamper Proof has been
activated.
@ Now regardless of what other operating buttons are touched, the VCR will continue to operate in the present
mode and the TAMPER PROOF LED indicator will flash.
(If Tamper Proof is activated during playback, once the tape reaches its end, the VCR automatically
rewinds the tape, ejects it and turns the power off.)
Disengaging Tamper Proof
• Press TAMPER PROOF for about 2 seconds.
The TAMPER PROOF LED indicator starts flashing and then disappears. Now, Tamper Proof is disengaged.
• If power is interrupted for more than 5 seconds (power failure, etc.), Tamper Proof may disengage.
• If, Tamper Proof is on, you attempt to change modes by pressing any button, the TAMPER PROOF LED indicator will flash.
34