Hardware Specification - NEC Express5800/120Rh-2 Datasheet

NEC Express5800/120Rh-2
64-bit Intel
3.60GHz/3.40GHz/3.20GHz
1MB
2 nd Cache
CPU
2MB (3.60GHz model only)
800MHz
Front Side Bus
1-2
No. of CPU
Intel ®
Supported
Hyper Threading
Technology
Intel ®
Supported
Extended Memory 64
Technology
Chipset Intel
DDR2-400 SDRAM DIMM
ECC, Chipkill
Memory
Standard 1GB (512MB x 2)
16GB (2GB x8)
Max
(when standard DIMMs are removed)
1.8TB (300GB x 6)
Max
Ultra 320 SCSI
I/O
On-board : SCSI RAID 0, 1,
Internal
RAID
HDD
Option
Supported
Hot-Plug
FDD 3.5" x 1
CD-ROM
X 24, ATAPI
1000BASE-T x 2
Network
(100BASE-TX and 10BASE-T are supported.)
Microsoft, Windows and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States
•
and/or other countries.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
•
Linux is a trademark of Linus Torvalds.
•
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
•
All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.
•
Specifications are subject to change without notice.
•
For further information, please contact:
Cat.No. E05BS7

Hardware Specification

® Xeon TM Processor
® E7520
RAID 1 spanning
: RAID 5
1[1](3.5" backup device is supported.)
Device Bays [Free]
Disk Drive Bays [Free] 6[6]
64bit/100MHz PCI-X x3
64bit/66MHz PCI-X x3
Option 1
Expansion Slots
Option 2
Option 3
ATI RADEON 7000 (16MB)
Graphics
Power Consumption
610VA/600W
Standard : 1, Not redundant
Power Supply
Option
Standard : Not redundant
Cooling Fan
Option
Display x1, Keyboard/ Mouse x1
External Interface
USB2.0 x4, 1000BASE-T x2, SCSI x1
Serial x2
483W x 887D x 88H
Dimensions (mm)
(including front bezel and objects on the chassis)
21kg (standard), 30kg (max)
Weight
Windows
Windows Server
*6
Support OS
Standard Edition / Enterprise Edition
Red Hat Linux
*1
Operate at 66MHz if all three slots are used.
*2
Replace standard Riser Card with optional Riser Card [N8116-02].
*3
Replace standard Riser Card with optional Riser Card [N8116-03].
*4
Replace standard Riser Card with optional Riser Card [N8116-04].
*5
Use a Y-cable provided with the system.
*6
Windows Server 2003 x64 Edition is to be supported when available.
www.necam.com/servers/
*1
*2
: 64bit/133MHz PCI-X x3
*3
TM
: PCI EXPRESS (x4) x2
64bit/133MHz PCI-X x1
*4
: 64bit/33MHz PCI(5V) x3
: Up to 2, redundant, hot-swap
: Redundant, hot-swap
*5
® 2000 Server/Advanced Server
TM 2003,
NEC EXPRESS5800