NEC Express5800 Series User Manual page 41

3. Specify the size of the logical drive and the disk drives to be used.
On the Logical Drive Size, specify the capacity of the logical drive.
To use the maximum capacity of the disk, put a checkmark on the Use Maximum
Capacity checkbox (a checkmark is put by default). To specify a capacity, remove the
checkmark from the checkbox and type a required value in Logical Drive Size in MB.
Ex.: To create a logical drive of 40 GB, type "40000."
Select physical drives to be used. Selectable drives are enclosed with black frames. If a
drive is selected, it will be enclosed with a red frame.
Click [Next].
4. Type the name of the logical drive in Assigned Name and click [Next].
- -
38