IMPORTANT:
To use WebPAM on Internet Explorer, some default
settings of Internet Explorer must previously be
changed. Change the default settings following
"Appendix A Preparation for Using WebPAM on
Internet Explorer."
After the installation of WebPAM, always install the
Standby/Hibernation Lock following Appendix C at
the end. This RAID system does not support the
power control feature.
NOTE: To display event messages on the NEC ESMPRO
Manager or to use the express report service, some
settings may be required. Make the settings appropriately
following Appendix B. For the event list, see Appendix
B.
-
-
7