NEC Express5800 Series User Manual page 66

Express5800 series disk array controller
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Alert report messages and actions
Just after the installation of WebPAM, the following messages registered with source name
"Promise Napa I2API" in the application event log are set as reported sources. To change the
setting, redefine it by using the report setting feature of the NEC ESMPRO Agent.
Event
Message
ID
271
Media patrol on disk %d
aborted at %d%% because
of error
275
%d disk error logged on
disk %d
523
Rebuild on logical drive
"%s" paused at %d%%
524
Rebuild on logical drive
"%s" aborted at %d%%
525
Rebuild on logical drive
"%s" aborted at %d%%
because of error
526
Rebuild on logical drive
"%s" resumed
527
Rebuild on logical drive
"%s" completed
528
Foreground Initialization on
logical drive "%s" started
529
Foreground Initialization on
logical drive "%s" paused
at %d%%
531
Foreground Initialization on
logical drive "%s" aborted
at %d%% because of error
537
Background Initialization on
logical drive "%s" aborted
at %d%% because of error
543
Synchronization on logical
drive "%s" aborted
at %d%% because of error
549
Redundancy Check on
logical drive "%s" aborted
at %d%% because of error
567
Rebuild on logical drive
"%s" rebuild on stream %d
aborted at %d%%
1283
Memory multi bit error
Action
Check if some defects occur in HDDs
and cables. Remove the defects if any.
Bad sectors have been accumulated in
the HDD. The user should prepare the
HD for replace or hotspare HDD.
None
None
Rebuild failed. After checking the
WebPAM log, take the proper action
following the User's Guide.
None
None
None
None
Check if some defects occur in HDDs
and cables. Remove the defects if any.
Check if some defects occur in HDDs
and cables. Remove the defects if any.
Check if some defects occur in HDDs
and cables. Remove the defects if any.
Check if some defects occur in HDDs
and cables. Remove the defects if any.
Rebuild failed due to the target HDD
failure. After checking the WebPAM log,
take the proper action following the
User's guide.
Failure detected in the controller.
Replace the controller.
-
-
63
Man-
ALIVE
ager
-
-
-
-
-
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8103-89N8103-101N8103-103

Table of Contents