Table of Contents
Advertisement
Changing the speed & temperature
setup
The model FISH440 fishfinder is able to display
boat speed, water temperature, and water depth.
This menu enables you to customise the display
of speed and temperature and to change the
calibration setting of these features.
Temperature units Temperature can be
displayed in either °C or °F.
Temperature calibration If the displayed
temperature is known to be wrong then it
can be adjusted using this function. The
calibration value is saved in memory
automatically.
Speed units of measure Speed can be
displayed in either knots (KTS) miles per
hour (MPH) or kilometres per hour (KPH).
Speed calibration
known to be wrong then it can be adjusted
using this function. The calibration value is
saved in memory automatically.
Reset log
The distance log can be reset by
changing this option from 'NO' to 'YES'. If the
selection is YES, the log will be reset when
you exit this menu.
•
Press the
key until the setup 2 menu is
displayed
•
Press either the
move the pointer to the required setup item
Use the V or the ^ key to adjust the
•
setting to the desired value
•
Press the
key to accept the choice
and return to normal display mode
18
If the displayed speed is
key or the
key to
NAVMAN Fishfinder User Manual
Hide quick links:
Advertisement
Table of Contents
