Navman Datahelm 8120 Installation And Operation Manual page 15

2-7-1 Multi window displays
The 8120 can show up to four windows at
once, for example Chart, Sonar, Gauges and
Video:
Adding a window to the display
, select Add window and select
Press
DISPLAY
a window to add. The 8120 automatically
rearranges the display to show the new
window.
Changing window size
and select Split ratio.
1 Press
DISPLAY
2 Press or to change the width of the
windows. If the 8120 is displaying three or
four windows, press
height of the windows.
Note: Some windows are fixed in size.
3 Press .
ENTER
The active window
If there is more than one window displayed,
the active window is indicated by a red
border. To change the active window to the
next window, press
Pressing will display the options menu
MENU
for the active window.
Chart is active
15
or to change the
.
Red border
Press
Press
Deleting a window from the display
1 Press until the window you want to
delete has a red border.
2 Press and select Delete window.
DISPLAY
Exchanging two windows on the display
1 Press until the first window has a red
border.
2 Press , select Replace and select the
DISPLAY
second window.
The 8120 exchanges the two windows.
Replacing a window on the display
1 Press until the window that you want
to replace has a red border.
2 Press , select Replace and select a
DISPLAY
new window that is not currently visible.
Note
1 When some windows are small then not all
the data is shown.
2 Set up commonly used displays as
favourites and press
between displays (see section 2-7-2).
8120 Installation and Operation Manual
to switch
Sonar is active