Settings You Can Change With User Tools; General Features - Ricoh C2824 Operating Instructions Manual

Settings You Can Change with User Tools

General Features P.
❖ ❖ ❖ ❖ Auto Paper Select Priority
Auto Paper Select is the default
setting. You can cancel this setting.
See p.34 "Selecting Copy Paper".
Note
❒ Default: On
❖ ❖ ❖ ❖ Paper Display
You can choose to have the avail-
able paper trays and sizes shown
on the initial display.
Note
❒ Default: Display
❒ If you select [Hide], the display is
shown as below. Press [Auto Pa-
per Select] to display paper sizes.
❖ ❖ ❖ ❖ Original Type Display
You can have the original types
shown on the initial display.
Note
❒ Default: Display
1
/
5
❖ ❖ ❖ ❖ Original Type Priority
❖ ❖ ❖ ❖ Original Photo Type Priority
❖ ❖ ❖ ❖ Auto Tray Switching
Settings You Can Change with User Tools
❒ If you select [Hide], the display is
as below.
You can select the original type ef-
fective when the power is turned
on, or modes cleared. See p.33 "Se-
lecting the Original Type".
Note
❒ Default: Full Color/Two-color:
Text / Photo, B&W/Single Color:
Text / Photo
When you select "Text / Photo" or
"Photo" in "Original Type Priori-
ty", you can change the settings of
the selected original type.
Note
❒ Default: Text / Photo: Printed
Photo, Photo: Printed Photo
If you load paper of the same size
in two or more trays, the machine
automatically shifts to the other
when the first tray runs out of pa-
per (when Auto Paper Select is se-
lected.) This function is called
"Auto Tray Switching". This set-
ting specifies whether to use Auto
Tray Switching or not.
5
113