Rear And Inside The Machine - Samsung SCX-4500 Series User Manual

Monochrome laser multifunction
Hide thumbs Also See for SCX-4500 Series:
Table of Contents

Advertisement

10 Hold both edges of the rear cover, and align it as shown in the
following figure. Press the rear cover firmly until it clicks.
Note
If the rear cover is not completely closed, the paper jam may
occur.
11 Open and close the top cover firmly. The machine will resume
printing.

Rear and inside the machine

If paper is jammed in the rear and inside the machine, follow the next
steps to release the jammed paper.
1
Open the rear cover.
2
Carefully take the jammed paper out of the machine.
Caution
Do not touch the fuser inside the machine. It is hot and could
cause burns! The fuser's operating temperature is very hot.
Take care when removing paper from the machine.
3
Hold both edges of the rear cover, and align it as shown in the
following figure. Press the rear cover firmly until it clicks.
Note
If the rear cover is not completely closed, the paper jam may
occur.
9.3
<Troubleshooting>

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-4500c

Table of Contents