Table of Contents
Advertisement
Troubleshooting
If the PCS150R is not connecting to the network during system setup, i.e., the Eth0 IP field
in the System Information display (see setup procedure on page 12) is blank:
1. Check the ETHERNET-0 connector on the rear panel of the PCS150R. Make sure the
cable connection is tight and secure.
2. Observe the green LED on the ETHERNET-0 port. Once the PCS150R is connected to
the network, the LED will be lit continuously.
3. Contact the network administrator to verify the network status.
Specifications
Dimensions
Height:
1.692 inches (42.977 mm)
Width:
19.0 inches (482.6 mm) (for EIA standard 19-inch rack mount)
Depth:
8.5 inches (215.9 mm)
Weight:
3.45 pounds (1.56 kgrms) rack-only weight
Environmental Storage Conditions
Temperature:
Humidity:
Environmental Operating Conditions
Temperature (Tma): 0° to 40° Celsius
Humidity:
Electrical
DC Input:
Impedance at ASI Out jack:
Level at ASI Out jack:
Ethernet:
Note: Design and specifications subject to change without prior notice.
206-4157
Troubleshooting / Specifications
-20° to 70° Celsius
-4° to 158° Fahrenheit
95% non-condensing
32° to 104° Fahrenheit
95% non-condensing
+12V DC @ 4.0 Amps
75 ohms
800 mv
10/100/1000BaseT
23
Advertisement
Table of Contents
