Update The Vpn Setup - LG PCS150R Pro:Centric Installation & Setup Manual

Update PCS150R Application or OS Software via Serial Link
Caution: Do NOT initiate simultaneous menu sessions while a software update
is in progress. Doing so may interfere with the active process and may corrupt
the system configuration and/or cause the PCS150R to cease normal operation.
This option enables you to update the PCS150R application or OS software via a serial link
to the PCS150R. Refer to "Update PCS150R Application or OS Software via Ethernet" on
the previous page for information on updating software via the Ethernet.
The appropriate update file must be provided by LG. The system will not transfer an improper
file.
1. Log in to the PCS150R as described on page 13.
Command > prompt, type updser and press Enter.
2. At the
The system prompts for the file:
PCS150R Serial Update Tool v1.1
Copyright (C) 2010 Zenith Electronics LLC
Send file using XMODEM
3. At the system prompt, transfer the new application/OS file using Xmodem protocol.
For example, in HyperTerminal, select Transfer and then Send File.... In the Send File
window, enter or select the appropriate filename in the Filename field, and select Xmodem
in the Protocol field.
The system will display progress messages as well as the result of the update process
(which may take several minutes).
4. When the update is successfully completed, the system may prompt you to reset the
PCS150R. If necessary, reset the server (see "Reset the PCS150R" on page 22).

Update the VPN Setup

This option enables you to update the VPN client via a serial link to the PCS150R. The
appropriate update file must be provided by LG. The system will not transfer an improper file.
1. Log in to the PCS150R as described on page 13.
Command > prompt, type vpn and press Enter.
2. At the
The system prompts for the file:
Send VPN client file using Xmodem ...
3. At the system prompt, transfer the new VPN client file using Xmodem protocol.
For example, in HyperTerminal, select Transfer and then Send File.... In the Send File
window, enter or select the appropriate filename in the Filename field, and select Xmodem
in the Protocol field.
206-4157
PCS150R Configuration Options (Cont.)
(Continued on next page)
21