Table of Contents
Advertisement
Troubleshooting
If the PCS100R is not connecting to the network, i.e., the IP Address field in the System
Information display (see setup procedure on previous page) is blank:
1. Check the NETWORK connector on the rear panel of the PCS100R. Make sure the cable
connection is tight and secure.
2. Observe the green LED on the NETWORK port. Once the PCS100R is connected to the
network, the LED will be lit continuously.
3. Contact the network administrator to verify the network status.
Specifications
Dimensions
Height:
1.692 inches (42.977 mm)
Width:
19.0 inches (482.6 mm) (for EIA standard 19-inch rack mount)
Depth:
8.5 inches (215.9 mm)
Weight:
2.70 pounds (1.22 kgrms) rack-only weight
Environmental Storage Conditions
Temperature:
Humidity:
Environmental Operating Conditions
Temperature (Tma): 0° to 35° Celsius
Humidity:
Electrical
DC Input:
Impedance at ASI Out jack:
Level at ASI Out jack:
Ethernet:
Note: Design and specifications subject to change without prior notice.
206-4142
Troubleshooting / Specifications
-20° to 70° Celsius
-4° to 158° Fahrenheit
95% non-condensing
32° to 95° Fahrenheit
95% non-condensing
+12V DC @ 5 Amps
75 ohms
800 mv
10/100/1000BaseT
13
- Quick Links:
- System Setup
Hide quick links:
Advertisement
Table of Contents
