Pcs150R Configuration Options - LG PCS150R Pro:Centric Installation & Setup Manual

Lg server installation & setup guide
Hide thumbs Also See for PCS150R Pro:Centric:
Table of Contents

Advertisement

This section describes configuration options for the PCS150R.
Note: Before you proceed with any additional server configuration, the system
should be installed and operating as described in the system setup procedure
on pages 11 and 12.
Also note that configuration updates will generally require that you reset the PCS150R. Make
sure to reset the unit when directed to do so.
Network and Communication Options
There are two options for establishing communication with the PCS150R:
• Direct connection to the PCS150R RS-232 port
Connect a PC to the RS-232 port on the PSC150R rear panel using a DB9 Male-to-DB9
Female RS-232 straight-through serial cable (Example: Cables Unlimited PCM-2100-06
serial cable) and, if necessary, a USB 2.0-to-serial DB9 adapter (Example: Cables Unlimited
USB-2920 adapter).
Using HyperTerminal or an equivalent terminal emulation program on the PC, configure the
serial port as follows:
− Bits per second = 115200
− Data bits = 8
− Parity = None
− Stop bits = 1
− Flow Control = None
• Network connection to the PCS150R Ethernet port
Use an SSH client to establish communication with the PCS150R. The default network
setting for the PCS150R is DHCP, in which case the server assigns an IP address to the
PCS150R. If necessary, consult the network administrator to obtain the IP address that has
been assigned to the PCS150R.
Log In to the PCS150R
If necessary, consult the network administrator to obtain the "admin" user password before
proceeding.
1. Establish communication with the PCS150R using one of the communication options
described above. Once communication is established, you should see a login prompt.
pcs150r login: prompt, type admin and press Enter.
2. At the
Password: prompt, type the admin password and press Enter.
3. At the
Command > prompt, either:
4. At the
• Press Enter to display the PCS150R Main Menu (see example on following page).
• Type the desired command and press Enter.
The following sections describe each of the configuration commands.
206-4157

PCS150R Configuration Options

13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Centric pcs150r pro

Table of Contents