Table of Contents
Advertisement
PCS150R Configuration Options (Cont.)
(Continued from previous page)
• Elementary PID: There are four Elementary PIDs. Type 4, 5, 6, or 7, depending on which
Elementary PID you wish to change, and press Enter.
Enter new value for Elementary PID# []: prompt, type the new
At the
Elementary PID and press Enter. The system will redisplay the video configuration,
showing your update.
Note: Assign video and elementary PIDS as necessary according to the system's
network distribution requirements.
Select parameter to change or press Enter to accept: prompt, select
4. At the
another parameter to change, if desired, and follow the prompts, or press Enter to accept
the displayed configuration parameters and return to the
Configure the TCP/IP Settings
1. Log in to the PCS150R as described on page 13.
Command > prompt, type setip and press Enter.
2. At the
The system displays an overview of the current TCP/IP network configuration followed by a
Network Configuration Menu, for example:
Current Network Configuration
Interface eth0
Host name:
Using DHCP:
Interface eth1
Host name:
Using DHCP:
DNS servers
Primary DNS:
Secondary DNS:
--------------------------
Network Configuration Menu
--------------------------
eth0
eth1
dns
exit
Choose item to modify >
16
pcs150r
YES
pcs150r
YES
68.94.156.1
68.94.157.1
Configure eth0
Configure eth1
Configure dns
Exit network configuration
Command > prompt.
(Continued on next page)
206-4157
Advertisement
Table of Contents
