Searching A Quickly For A Desired Scene (Setting The Zero Memory) (Vp-D363(I)/D364W(I)/D365W(I) Only) - Samsung VP-D36 Series User Manual

ENGLISH
Basic Recording
Searching a quickly for a desired scene (Setting the ZERO
MEMORY) (VP-D363(i)/D364W(i)/D365W(i) only)
✤ The ZERO MEMORY function works in both <Camera> and
<Player> modes. ➥page 19
✤ You can mark a point on a tape that you want to return to following
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote
control before the recording or during playback at the
point where you wish to return.
I
The time code is changed to a tape counter that
is set to ZERO MEMORY with the <
(ZERO MEMORY indicator).
I
If you want to cancel the ZERO MEMORY
function, press the [ZERO MEMORY] button
again.
4. Finding the zero position.
I
When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
I
When you have finished recording, set the
[Power] switch to [PLAYER] and press
the [œ œ œ œ (REW)] button.
The tape stops automatically when it reaches the
zero position.
5. The tape counter with the <
disappears from the display and the tape counter is changed to the
time code.
[ Notes ]
I
In the following situations, ZERO MEMORY mode may be cancelled
automatically:
- At the end of the section marked with the ZERO MEMORY function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
I
The ZERO MEMORY may not function correctly where there is a
break between recordings on the tape.
1
0:00:00>
> (ZERO MEMORY indicator)
✤
➥
✤
I
I
I
œ
I
I
I
œ œ œ œ
37 37