Searching A Quickly For A Desired Scene (Setting The Zero Memory) (Sc-D364/D366 Only); Sc-D364/D366 - Samsung SC D363 - MiniDV Camcorder With 30x Optical Zoom Owner's Instruction Book

ENGLISH
Basic Recording
Searching a quickly for a desired scene (Setting the
ZERO MEMORY) (SC-D364/D366 only)
✤ The ZERO MEMORY function works in both <Camera> and
<Player> modes. ➥page 19
✤ You can mark a point on a tape that you want to return to following
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote
control before the recording or during playback at the
point where you wish to return.
I
The time code is changed to a tape counter that
is set to ZERO MEMORY with the <
(ZERO MEMORY indicator).
I
If you want to cancel the ZERO MEMORY
function, press the [ZERO MEMORY] button
again.
4. Finding the zero position.
I
When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
I
When you have finished recording, set the
[Power] switch to [PLAYER] and press the
[œ œ œ œ (REW)] button.
The tape stops automatically when it reaches the
zero position.
5. The tape counter with the <
disappears from the display and the tape counter is changed to the
time code.
[ Notes ]
I
In the following situations, ZERO MEMORY mode may be canceled
automatically:
- At the end of the section marked with the ZERO MEMORY
function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
I
The ZERO MEMORY may not function correctly where there is a
break between recordings on the tape.
1
0:00:00>
> (ZERO MEMORY indicator)

SC-D364/D366

✤
<Camera>
✤
1. [Power]
[PLAYER]
2. [Mode]
3.
[ZERO MEMORY]
I
I
[ZERO MEMORY]
4.
I
0
œ
I
[PLAYER]
[œ œ œ œ (REW)] œ œ œ œ
5. <
0
[ ]
I
-
-
0
-
I
0 ➥
<Player> 19
0
[CAMERA]
0
[TAPE]
0
< 0:00:00>
0
0
0
0
[Power]
0
0
>
0
0
0
0
37 37