Connecting To A Pc; Disconnecting The Usb Cable; 连接至Pc机; 断开Usb连线 - Samsung VP-DC565i Owner's Instruction Book

ENGLISH
USB Interface

Connecting to a PC

1. Connect a USB cable to the
USB jack on the PC.
2. Connect the other end of the
USB cable into the USB jack
on the DVD Camcorder. (USB
jack)
 If a PC is connected to the
DVD Camcorder with a
USB cable, only [Power]
switch, [Mode] switch,
[Zoom] lever can be
operated.

Disconnecting the USB Cable

 After completing the data transmission, you must disconnect the
cable in the following way:
1. Select the removable disc icon and click the right mouse button to
select "Eject".
2. Select "Confirm" and disconnect the USB cable when the Windows
Splash screen appears.
Notes
If you disconnect the USB cable from the PC or the DVD

Camcorder while transferring, the data transmission will stop and
the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or

simultaneously connect the USB cable along with other USB
devices, the DVD Camcorder may not work properly. If this occurs,
remove all USB devices from the PC and reconnect the DVD
Camcorder.
You should set the USB Connect to Computer to connect to a PC

via USB cable. page 109
112
All manuals and user guides at all-guides.com
USB接口
连接至PC机
断开USB连线
 数据传输完成后，您必须按照下列步骤断开连线：
1. 选择移动硬盘图标并点击鼠标右键选择"弹仓"。
2. 当屏幕显示视窗窗口时，选择"确认"，并断开USB连线。
注意
 若在数据传输期间从计算机或DVD摄像机拔下USB电缆，数据传输将
会停止且数据可能会损坏。

若通过USB集线器将USB电缆连接至计算机，或同时将USB电缆连接其
他设备，DVD摄像机可能无法正确操作。若发生此情形，请从计算机
卸下所有USB设备然后重新连接DVD摄像机。
 应该将USB 连接设置为计算机以便通过 USB 电缆连接至 PC。
109页
中 文
1. 将USB线接到PC机上的USB接口
上。
2. 将USB电缆的另一端连接至DVD
摄像机上的USB插孔。
 若使用USB电缆将计算机
连接至DVD摄像机，只有
[Power]转换器、[Mode]转
换器、[Zoom]杆可以操作。