Equalizer Curve Adjustment - Pioneer AVM-P8000R Owner's Manual

Equalizer Curve Adjustment

You can adjust the currently selected equalizer curve settings as desired. Adjusted equalizer
curve settings are memorized in "CUSTOM".
Before performing the following steps, select the source whose EQ curve you'll adjust.
(Refer to "Operation for Each Source Unit" on page 9.)
1. Check to see "Equalizer" is currently high-
lighted.
If not, select that option by moving the joystick.
"Equalizer" is highlighted in green.
2. Click the joystick.
The Graphic Equalizer Menu appears, with "Band"
highlighted in green.
3. Select the band by clicking the joystick.
Each click changes band in the following order:
Low = Mid = High
4. Select "Level", "Frequency" or "Q Factor" by
moving the joystick.
Selected option is highlighted in green.
5. Adjust the selected option by moving the joy-
stick up/down.
The selectable options are adjustable in the following
limits:
As well, "Frequency" differs in adjustable range from
Band to Band.
Option
Level
Frequency
Q Factor
67
Adjustable Range
–12 dB to +12 dB
Low: 40/80/100/160 Hz
Mid: 200/500/1k/2k Hz
High: 3.15k/8k/10k/12.5k Hz
2W/1W/1N/2N