Fine-Adjusting Equalizer Curve; Adjusting Bass And Treble; Adjusting Bass And Treble Level - Pioneer DEH-P5850MPH Operating Manual

Audio Adjustments

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ LOW/EQ MID/
EQ HIGH).
Level (dB)
Center frequency
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F 80 Q 1W) appears
in the display.
2 Press AUDIO to select the band for ad-
justment from among low, mid and high.
Press AUDIO repeatedly to switch between
the following functions:
LowMidHighBass (bass adjustment)
Treble (treble adjustment)
# If EQ-EX function has been selected and only
when EQ-EX is turned on and Custom is selected
as the equalizer curve, you can switch to Bass
and Treble.
3 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap-
pears in the display.
Low: 4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3.15k8k10k12.5k (Hz)
4 Press a or b to select the desired Q fac-
tor.
Press a or b until the desired Q factor ap-
pears in the display.
2N1N1W2W
All manuals and user guides at all-guides.com
If you make adjustments, Custom curve is up-
dated.

Adjusting bass and treble

Use this function to adjust the bass and treble.
Q=2W
The ability to select the frequency as well as
Q=2N
the level gives you good control over the total
balance of audio.
Frequency (Hz)
! If EQ-EX function has been selected and

Adjusting bass and treble level

You can adjust the bass and treble level.
1
Press AUDIO until Bass appears in the dis-
play.
# If the treble level has been previously ad-
justed, Treble will be displayed.
2
Press c and Bass is displayed. Press d and
Treble is displayed.
3
Each press of a or b increases or decreases
the selected bass or treble level. +6  6 is dis-
played as the level is increased or decreased.
Black plate (33,1)
Note
EQ-EX turned on and Custom selected as
the equalizer curve, you can adjust bass
and treble settings.
Press AUDIO to select Bass.
Press c or d to select bass or treble.
Press a or b to adjust the level.
<XRD7106-A/N>33
Section
08
33
En