Adjusting The Display Position; Changing The Pattern Of Plate - Pioneer AVM-P8000R Owner's Manual

3. Adjust "Hour" by moving the joystick
up/down.
4. Adjust "Minute" by moving the joystick
left/right.
As soon as you switch to "Minute", the seconds start
counting from 00.
5. Click the joystick.
The clock adjustment display disappears.
Note:
• How to display the time indication is discussed under the heading of "Switching the Center
Screen and Time Display in the Center Room" on page 79.

Adjusting the Display Position

You can adjust the position of the display.
1. Select "DISP POSI" by moving the joystick.
"DISP POSI" is highlighted in green.
2. Click the joystick.
3. Adjust the display position by moving the joy-
stick.
4. Click the joystick.
The adjusted display position is memorized.

Changing the Pattern of Plate

You can change the pattern of the Source Plate and Flip-Down Plate in sequence.
1. Select "Plate" by moving the joystick.
"Plate" is highlighted in green.
2. Click the joystick.
Each click changes the pattern of the plate in the fol-
lowing order:
Pattern 1 = Pattern 2 = Pattern 3
78