Table of Contents
Advertisement
PI Seek Function
The tuner searches for another frequency broadcasting the same programming. "PI SEEK"
appears on the display and the radio volume is muted during a PI Seek. The muting is discon-
tinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI
Seek is unsuccessful, the tuner returns to the previous frequency.
PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too
weak for proper reception, the PI Seek will automatically start.
Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances, this product can be
set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
Note:
• Refer to "Changing the Initial Settings" for details on how to switch Auto PI Seek ON/OFF.
Regional Function
When AF is used to retune the tuner automatically, REG (regional) limits the selection to sta-
tions broadcasting regional programs.
Note:
• Regional programming and regional networks are organized differently depending on the
country (i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station which
differs from the originally set station.
• REG can be switched ON or OFF independently for each FM band.
Activating/Deactivating the REG Function
The REG function is set to ON by default.
1. Press the MENU button.
The main menu icons whirl down, with "Function"
highlighted in green.
2. Click the joystick.
The Tuner Function Menu appears.
3. Select "REG" by moving the joystick.
"REG" is highlighted in green.
4. Activate or deactivate REG while in an FM
band by clicking the joystick.
Each click toggles REG On/Off.
5. Press the RETURN button.
You go back to the Center Room.
27
Hide quick links:
Advertisement
Table of Contents
