Non Fading Output - Pioneer AVM-P8000R Owner's Manual

Non Fading Output

When the Non Fading Output setting is ON, the audio signal does not pass through this unit's
low pass filter (for the Subwoofer), but is output through the RCA output.
When the Non Fading output is ON, you can adjust the level of Non Fading output.
Note:
• When the Subwoofer Controller setting is only "External" in the Initial Settings Menu, you
can switch "Non Fading Set". (See page 77.)
1. Select "Non Fading" by moving the joystick.
"Non Fading" is highlighted in green.
2. Click the joystick.
The Audio Setting Menu appears, with "Non Fading
Set" highlighted in green.
3. Click the joystick.
and
select a level.
4. Switch the Non Fading Output ON/OFF by
moving the joystick up/down.
5. Increase or decrease the output level by mov-
ing the joystick left/right.
The display shows "0" – "–15".
6. Cancel the Non Fading Output Setting by
clicking the joystick.
71
shows indicating that you are ready to