Advertisement
CM4-S Cooking Computer — Alarm Programming
To exit alarm programming, press hidden programming button
7.
twice. Ex Cycle , which is described in section 6, will display on the
computer at the first push. On the second button push the computer
will revert to segment and product number.
Resume programming for segmented, non-segmented, filter or non-
8.
filter mode as described in their sections.
Determine the point in the cooktime countdown the second alarm
9.
should occur. For example, to set an alarm seven minutes into a 13-
minute cook cycle, set the alarm at 6:00, the time the computer will
display when seven minutes have elapsed in the cook cycle. (See
graphic above).
Use
to toggle between A and M. With desired time and alarm-
10.
canceling mode displayed, press
Determine the point in the cooktime countdown the thirdt alarm
11.
should occur. For example, to set an alarm 11 minutes into a 13-
minute cook cycle, set the alarm at 2:00, the time the computer will
display when 11 minutes have elapsed in the cook cycle. (See
graphic above).
Use
to toggle between A and M.
12.
To exit alarm programming, press hidden programming button
13.
twice. Ex Cycle , which is described in section 6, will display
on the computer at the first push. On the second button push the
computer will revert to segment and product number.
Resume programming for segmented, non-segmented, filter or non-
14.
filter mode as described in their sections.
to proceed to set Alarm 3.
5-2
Advertisement
