Frymaster BIH52 Series Service Manual page 113

ITEM PART #
1
806-6423SP
806-7377SP
2† 806-5618SP Pan Assembly, Filter (has no screen alignment pins in pan bottom) (Paper
3
823-2027
823-2321
4 810-1405
5 810-1408
6 900-8818
7 900-8819
8 823-2234SP Pan, Filter (has screen alignment pins in pan bottom)
9† 823-1979SP Pan, Filter (has no screen alignment pins in pan bottom)
10 809-0422
826-1490
11 810-1387
12 900-5448
13 810-0946
14 810-0948
15 810-1388
16 816-0597
17 824-0430
18 823-2586
19 823-2574
20 900-8829
21 823-2575SP Pan, Filter (for use in BIH152 units)
22 823-2578
23 810-0697
24 826-1392
25 809-0028
* 806-8550SP Inner Pan w/ ck valve and O-rings
† Used on some early-production Japanese/Far East (JBIH52) units only.
* Not illustrated.
Pan Assembly, Filter (has screen alignment pins in pan bottom)
Standard
For use on Japanese/Far East (JBIH52) units.
pans used in Japan)
Cover, Filter Pan
For use with 806-6423SP and 806-5618SP assemblies.
For use with 806-7377SP units (has lower splash guard than 823-2027)
Ring, Hold Down (for use with 806-6423SP and 806-7377SP assemblies)
Ring, Hold Down (for use with 806-5618SP assembly)
Screen, Sana Grid (9 x 17-inch/23 x 43cm, has alignment holes)
Screen, Sana Grid (12 x 19.5-inch/30.5 x 49.5cm, has no holes)
Screw, 10-32 x 7/16-inch Slotted Truss Head
Kit, Filter Pan Check Valve Service (consists of Items 11 through 16)
Retainer, Check Valve
Strainer, Check Valve
Spring, Check Valve
Ball, Check Valve
Tube, Check Valve
O-Ring, Check Valve
Screen, Crumb (used with 806-5618SP, 806-6423SP, and 806-7377SP)
Cover, Filter Pan (for use with 823-2575SP)
Ring, Hold Down (for use in 823-2575SP)
Screen, San Grid (10 x 9-inch/23 x 25cm, for use in 823-2575SP) Baby FP
Bracket, BIH152 Oil Return
Disconnect, Male
O-Ring, BIH152 Oil Return (Pkg of 5)
Nut, Wld 10-32 Sngl Wng
COMPONENT
4-42