Xerox DocuPrint 240A User Manual page 59

Feed Separators from
Set the destination where the separators are to be fed to when the transparency separator
function is used.
When [Auto] is selected, the tray set on the printer is used as the feed destination.
[None] (default)
[Auto]
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
Print on Separators
Specify whether or not to print the details printed on the transparencies on the separators
as well when the transparency separator function is used.
[Blank Separators] (default)
[Printed Separators]
Paper Type/Media
Specify whether to set the paper type or media.
Print Mode
Specify whether to give priority to the print speed or the image quality.
Halftone
Specify the type of the halftone from among [Type - 1 Fine Dots], [Type - 1 Thick Dots] or
[Type 3]. The number of screen lines for Type 1 is automatically set according to the
resolution set in the [Print Mode].
All settings provide 256 levels of halftone.
[Type - 1 Fine Dots] (default)
Select this when you print texts or graphics.
[Type - 1 Thick Dots]
Select this when you print photos or images. This provides higher gradation than [Type - 1
Fine dots].
[Type 3]
When the moire interference pattern occurs in the other halftone settings, selecting this may
resolve this problem.
Image Enhancement
Specify whether to use the [Image Enhancement] function.
Selecting [On] smoothes out boundaries when printing. This reduces jagged edges, thereby
artificially increasing the resolution of the image. When printing an image (bitmap)
composed of coarse halftone dots, smooth color gradation is impossible in certain
situations. In this case, select [Off].
Draft Mode
Specify whether to reduce the amount of toner used when printing drafts.
When you select [On], the overall printed color becomes lighter. This is best for printing
documents when print quality is not necessary.
59
4.4 Options