Options; Configure Settings - Xerox DocuPrint 240A User Manual

(1) Select [IP Printing] from the menu, and enter the IP address for the printer being
(2) Select [FX] from [Printer Model], and select the printer to be used.
(3) Click [Add].
Regarding Printer Options
For Mac OS X v10.2.x, click [Printers] on the [Print Center] menu bar, and select [Show
Info].
Next, select [Installable Options], and select the options that have been installed to the
printer.
Note
• The optional accessory settings can be configured, but the conflict settings between the functions of
optional accessory and the other functions are not resolved automatically.
Refer to
• "Configure Settings" (P. 55)
If your operating system is Mac OS X v10.1.5, you cannot configure the optional accessory
settings. All the optional accessories are verified as installed. Note that you can select all
the optional accessories even though some of them are not actually installed.
4.4

Options

This section describes the configuration settings and the printer specific options settings.

Configure Settings

For Mac OS 9.x and Earlier
This section describes installable options for operating systems earlier than Mac OS 9.x.
Note
• Normally, [Installable Options] are automatically set according to the bi-directional communications with
this printer. You do not have to change the settings.
1. Select the printer using the [Chooser] and click [Setup].
When Using IP Printing
used in [Printer's Address].
55
4.4 Options