Table of Contents
Advertisement
3.3
Starting up in the
Command Mode
The following can be started up by entering the command in the Ezlnst folder of the
CD-ROM directly (in command mode).
The command mode is a start up method and can be used in operations such as batch processing.
Installing the printer driver P. 43
G
Installing the printer driver by using the created setup disk P. 44
G
Deleting the installed printer icon P. 45
G
Uninstalling the installed printer driver P. 46
G
3.3.1
Installing the Printer Driver - Command
Mode
For Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003, log on as a user of
the administrator group or as the administrator.
Command line
Parameter
Model ID
Startup example
Error Display
SETUP
/m Model ID (
/m Specify the model ID and run setup.
It can be specified in upper or lower case, single byte
characters.
Enter the ID of the model to be installed after the option (/m)
Enter the model ID in upper case, single byte characters.
Model ID
FXDP240
DocuPrint 240A-AP
FXDP340
DocuPrint 340A-AP
FXDP205
DocuPrint 205-AP
FXDP255
DocuPrint 255-AP
FXDP305
DocuPrint 305-AP
SETUP
/mFXDP305
(when installing DocuPrint 305 printer driver)
When you have entered an incorrect parameter, a "Invalid
parameter" dialog box will appear. In this case, click OK to end
the operation.
indicates spacing)
Model to be installed
3
43
Advertisement
Table of Contents
