Wi-Fi/NFC
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address])
Select the menu.
[MENU] > [Setup]>[Wi-Fi]>[Wi-Fi Setup]>Desired item to be set
[LUMIX CLUB]
•
P253
Refer to
for details.
[PC Connection]
•
For details on how to enter characters, refer to
•
If you are using the PC with standard settings, you do not need to change the workgroup.
[Device Name]
•
For details on how to enter characters, refer to
•
A maximum of 32 characters can be entered.
[External AV device]
•
P258
Refer to
for details.
Acquires or changes the "LUMIX CLUB" login ID.
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is "WORKGROUP".)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Exit the menu after it is set.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
Images can be sent to the AV device of relatives and
acquaintances via "LUMIX CLUB".
267
"
"
Entering Text
section on P56.
"
"
Entering Text
section on P56.