Panasonic Lumix DMC-GF6 Owner's Manual page 51

Preparation
[Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
To turn the monitor on again, press any button or touch the monitor.
•
When [Live View Mode] is set to [ECO] the image quality on the recording screen may be
worse than when it is set to [NORMAL], but this does not affect the recorded image.
•
When [Live View Mode] is set to [NORMAL], the usage time is reduced.
•
[Economy] does not work in the following cases.
–
When connecting to a PC or a printer
– When recording or playing back motion pictures
–
During a slide show
•
When using the AC adaptor (optional), [Sleep Mode] is disabled.
[USB Mode]
The unit can be set up to prevent unnecessary battery
consumption. You can set up the unit to automatically turn this
unit off, automatically switch off the monitor, or display in such a
way that the power consumption of the monitor is reduced.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto Monitor Off]:
The monitor is automatically turned off if the camera has not been
used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
[Live View Mode]:
Sets the monitor to display in such a way that power consumption
is reduced.
[NORMAL]/[ECO]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
51