Basic
Taking a Still picture
•
Set the drive mode to [
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
•
Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
•
When the image is correctly focused, the
picture will be taken, since the [Focus/
Release Priority]
[FOCUS].
Focus Mode
Focus
Focus indication
AF area
Sound
Focus Mode
Focus
Focus indication
AF area
Sound
¢1 When AF Mode is set to [
displayed momentarily while pressing halfway.
¢2 A beep will be emitted when focus is first achieved during the pressing halfway.
•
When the brightness is insufficient for [AFF] or [AFC], the camera will operate as if
[AFS] has been set. In this case, the display will change to the yellow [AFS].
•
The focus indication is displayed as [
longer than usual.
3
Press the shutter button fully (push it in
further), and take the picture.
] (single) by pressing 4(
(P74)
(P156)
is set initially to
When the subject is
focused
C On
D Green
Beeps 2 times
When the subject is
focused
C On
D Green
¢1
Beeps 2 times
], the first AF area at which focus is achieved may be
LOW
58
).
D
3.5
3.5
3.5
60 60
60
B
A
AFS
When the subject is not
focused
Blinks
—
—
AFF/AFC
When the subject is not
focused
Blinks or Off
—
—
¢2
] in a dark environment, and focusing may take
C