Panasonic Lumix DMC-GF6 Owner's Manual page 55

Panasonic digital cameras owner's manual
Hide thumbs Also See for Lumix DMC-GF6:
Table of Contents

Advertisement

Preparation
[Pixel Refresh]
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
[Format]
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
If the card has been formatted on a PC or other equipment, format it on the camera again.
If the card cannot be formatted, consult Panasonic.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
It will perform optimization of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
(P326)
The card is formatted.
Formatting permanently deletes all data on your memory
card. Please be sure all pictures and motion pictures are
saved elsewhere before using this feature.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649).
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents