Adjust The Flash Output; Synchronzing The Output Of The Built-In Flash To The Exposure Compensation - Panasonic Lumix DMC-G6 Owner's Manual

Recording

Adjust the flash output

Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select [Flash] in the [Rec] menu.
2
Touch [Flash Adjust.].
3
Set the flash output by dragging the slide bar, and then touch [Set].
•
You can adjust from [j3 EV] to [
•
Select [n0] to return to the original flash output.
•
[ i ] or [ j ] is displayed on the flash icon in the screen when the flash level is adjusted.
•
Only available when [Wireless] in [Flash] is set to [OFF].
•
The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P310)
Synchronzing the output of the built-in flash to the Exposure
Compensation
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P149.
•
The [Auto Exposure Comp.] setting also applies to an external flash.
(P43)
i 3 EV] in steps of [1/3 EV].
(P146)
145
(P310)