Panasonic Lumix DMC-G6 Owner's Manual page 150

Recording
•
To compensate the exposure using the function lever, set [Function Lever]
[Custom] menu to [EXP.].
•
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation. (P145)
•
When the exposure value is out of the j3 EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of
the recorded image in the Auto Review or playback screen.
•
The set exposure value is memorized even if the camera is turned off.
•
When the aperture and shutter speed values are displayed in the screen in the Program AE
Mode, Program Shift operation and Exposure Compensation operation is switched every time
the rear dial is pressed.
•
In the Aperture-Priority AE Mode, Aperture Setting operation
Compensation operation is switched every time the rear dial is pressed.
•
In the Shutter-Priority AE Mode, Shutter Speed Setting operation
Compensation operation is switched every time the rear dial is pressed.
Not available in these cases:
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
(P99)
150
(P20) in the
and Exposure
(P100) and Exposure