Recording
About Automatic Gain Control setting
∫
Select [Auto Gain] on the screen shown in step
[ON]:
The brightness level is adjusted according to the number of pictures taken and the
pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
Combining RAW images in the card
∫
On the screen shown in step
be displayed. Select the RAW images, press [MENU/SET], and continue recording.
•
[Overlay] is available only for RAW images taken with this unit.
•
Image is not recorded until completion.
•
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
•
Items shown in gray on the menu screen cannot be set during multiple exposures.
Not available in these cases:
•
[Multi Exp.] is not available in the following cases.
–
When using [Time Lapse Shot]
–
When using [Stop Motion Animation]
1
1
, set [Overlay] to [ON]. After [Start], Images in the card will
194
and set it.