Easily Set Aperture/Shutter Speed For Suitable Exposure (One Push Ae) - Panasonic Lumix DMC-G6 Owner's Manual

Recording

Easily set aperture/shutter speed for suitable exposure (One Push AE)

Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
•
If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode. For more details on
Manual Exposure Assistance, refer to P102.
1
Set a function button to [One Push AE].
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2
(When exposure is not adequate) Press [Fn1].
-3 -3
3.5 3.5 3.5 4000 4000 4000
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
Recording Mode
•
In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
–
When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
–
When recording using the flash
–
In Preview Mode
–
When using a lens that includes an aperture ring
•
In Program AE Mode, you can cancel program shift by pressing function button.
0 0
16
0
(P104)
(P52)
SS SS SS
15 30 60 125
F
4.0 5.6
0
3.5 60 60 60 16
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
105
-3 -3 0 0
16
3.5 3.5 3.5 4000 4000 4000
0
A
250
8.0
98 98 98
0