Vodavi Starplus Triad-S Product Description Manual page 175

5-44
3. Dial [
4. When the desired name is shown on the LCD display, press the SPEED
Conditions
Transferring a Call Using Directory Dialing (while on a call)
1. Press the TRANS button.
2. Dial the Directory Dial Code [680] on the dial pad,
3. Press the digit associated with the person' s name and when it
4. Hang up to complete the transfer.
] on the dial pad to scroll up (next entry) through the list,
✳
-or-
Dial [#] on the dial pad to scroll down (previous entry) through the
list,
-or-
Press another button to view the list for a different letter of the
alphabet.
button to automatically dial the destination station or outside phone
number (via speed dial).
If the desired party is an intercom station, that station is signaled
according to it's H-P-T switch (SLT stations tone ring).
If the desired party is associated to a speed dial bin, the system
selects a CO line and dials the number programmed into the speed
dial bin. Call progress tones are then heard.
If a station is in the Directory Dialing mode and a CO or intercom call
rings in, the station must exit the Directory Dialing mode to answer
the call.
-or-
Press a pre-programmed flex button programmed for directory
dialing.
displays, press the SPEED button to automatically dial the destination
station.
Calls may be transferred to internal stations only. An attempt to
transferacall off-net(viaa speeddialbin) results inthe call recalling
upon going on-hook.
Directory Dialing - Stations