Table of Contents
Advertisement
PROBLEM
SOLUTION
b
While a programmed recording is being made, you cannot operate your recorder manually. If you
want to cancel the programmed recording, press STANDBY m .
b
The DVD recorder was switched on several minutes before the start of a programmed recording.
Switch off the DVD recorder with STANDBY m . A programmed recording (timer) will only
function if the DVD recorder is switched off (button STANDBY m ).
b
Either no disc has been inserted or you cannot record to this disc. Insert a disc that you can
record onto. Switch off the DVD recorder using STANDBY m .
b
A write-protected disc has been inserted. Cancel the protection (see 'Preventing accidental
erasing of discs' in 'Manual Recording') or insert a different disc.
b
If this error message appears after pressing TIMER , then all the TIMER blocks are already
programmed. No more recordings can be programmed. Press the C button. If you want to clear
or check a programmed recording (TIMER block), select it with B or A .
b
The data for the recording could not be transferred. Please check the date, start time and end
time of the programmed recording.
b
The information for two programmed recordings overlap.
b
If you ignore this error message the TV programme with the earlier start time will be recorded
first. You will miss the start of the second programme.
b
Change the information for one of the recordings.
b
Delete one of the recordings
Programming a recording (TIMER)
Hide quick links:
Advertisement
Table of Contents
