Table of Contents
Advertisement
Programming a recording (TIMER)
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming mode last selected is marked.
3
' with B or A . and confirm with C .
Select '
4
Select the programmed recording (TIMER) you want to check, change
or delete with B or A .
1
Press the CLEAR button.
2
Confirm with OK . '
screen.
'-- ---' appears rather than the displayed values
3
To end, press TIMER .
5
Press C .
Select the input field with D or C .
If required, change the information with B , A or the number
buttons 0..9 .
6
Confirm with OK .
7
To end, press TIMER .
8
Switch off with STANDBY m .
This DVD recorder is equipped with the 'NexTView Link' function. If your television is also
equipped with this feature, you can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a TIMER block on the DVD
recorder. If you clear this marking on the television, the corresponding TIMER block on the
DVD recorder will also be cleared.
For more information, read the instruction manual for your TV set.
' will briefly appear on the TV
Hide quick links:
Advertisement
Table of Contents
