Table of Contents
Advertisement
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), an S-Video (SVHS) cable (3), an audio
cable (4, supplied, red/white plug).
1
Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA socket at the back of the DVD recorder.
2
Insert one end of the supplied aerial cable into the TV socket at the
back of the DVD recorder and the other end into the aerial input
socket at the back of the TV set.
3
Insert one end of a S-Video (SVHS) cable into the OUT S-VIDEO
(Y/C) socket at the back of the DVD recorder and the other end into
the S-Video (SVHS) input socket on the TV set (usually labelled
'S-Video in' or 'SVHS in'. See TV operating instructions).
4
Insert one end of the supplied audio (Cinch) cable into the red/white
Cinch socket OUT L AUDIO R at the back of the DVD recorder
and the other end into the audio input socket (usually red/white) on
the TV set (usually labelled 'Audio in' or 'AV in'. See TV operating
instructions).
5
Switch on the TV set. Switch the TV set over to this input socket or
select the relevant channel number. Please see your TV's operating
instructions for the channel number you need.
6
Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end into
the wall socket. '
Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.
' will appear on the display.
Connecting the DVD recorder
Hide quick links:
Advertisement
Table of Contents
